I’m actually super excited to share my most recent DIY with you today. I veered a bit from the norm, took a risk, and think it turned out amazingly (if I do say so myself…). As mentioned, it sold in a single day so I must have done something right!
As soon as I saw this piece, I fell in love with it. The faux marble top wasn’t ideal, of course, but I loved the lines and at 60% off, I just couldn’t turn it down! So I lugged it home with a few other goodies and immediately began my grand plans…
Now, I’m typically inspired by the clean, crisp whiteness of a room, but lately my eye has been drawn to bold, jewel tones and pops of color. Like these lovely interiors:
Perhaps it’s the thought of warmth and sun and clear, blue skies, but cobalt has become quite the favorite color of mine. Pair it with a deep, glossy black and you have instant glamour! So with the thought of adding a little glamour into my own life, with a vintage twist, I went to work…
First, I sanded down the top and wiped down the table to remove the dust and grit. I then painted the entire piece in Annie Sloan’s Graphite and allowed it to dry for a day. Unfortunately, I forgot to take pictures in my excitement so I ask that you use your imagination!
Once the base layer was dry and settled, I brushed on a layer of Martha Stewart’s crackle medium (available at Michael’s). This is a medium you apply between layers of contrasting colors, and I was not shy in my application – I ended up using the entire bottle! Per the instructions, I allowed the medium to fully dry and then began painting my final layer. For the base, I used Valspar’s Fjord Blue in satin and for the top, I used Valspar’s Kettle Black in semi-gloss.
On a side note, there were actually quite a few things I was nervous about during this whole process: 1) how the crackle would turn out as I had never used the Martha Stewart brand before…if the crackle was too small, you wouldn’t be able to see the Graphite Black underneath, and if the crackle was too large, it would simply look like a big mistake! 2) If I went with too much gloss for the table top. I wanted it to look slightly muted with the Graphite black showing though from the crackle, but it could easily turn out looking like a bad paint job. 3) If I chose the right blue to contrast the black. I’ll let you be the judge…
Once the final layer was dry, I sanded the entire piece, used a bit of gold leafing (also available at Michael’s) to add that little touch of detail (which I also very lightly sanded), and finally, I gave the table a nice protective sheen using Annie Sloan’s clear wax.
Voila! You’ve got yourself some vintage glamour, baby!
What do you think…a little too much or just right?